The "No Bootable Device" error is a common problem encountered by Acer Nitro 5 laptop users. This issue can be quite frustrating as it prevents the laptop from starting up properly and accessing the operating system. Fortunately, this issue can often be resolved by following a few simple troubleshooting steps. In this guide, we will provide a step-by-step solution to fix the "No Bootable Device" error on an Acer Nitro 5 laptop.
I. Setting BIOS Default
1. Start by turning off your Acer Nitro 5 laptop.
2. Press the power button to turn it on and immediately start tapping the F2 or Del key repeatedly until the BIOS Setup Utility appears.
3. Once in the BIOS Setup Utility, navigate using the arrow keys and look for the "Load Default Settings" option.
4. Select "Load Default Settings" and press Enter.
5. Save the changes by selecting "Save and Exit" or pressing the F10 key.
II. Cleaning the HDD or SSD Connector
1. Turn off your laptop and unplug any cables.
2. Flip the laptop over and locate the compartment cover that houses the hard drive (HDD) or solid-state drive (SSD).
3. Unscrew the screws securing the compartment cover and carefully remove it.
4. Gently detach the HDD or SSD connector cable from its slot on the motherboard.
5. Clean the connectors on both the cable and the drive using a soft, lint-free cloth.
6. Reconnect the cable securely to the drive and ensure it is properly seated in the slot.
7. Reattach the compartment cover and tighten the screws.
III. Replacing a Damaged HDD or SSD
1. If the previous steps did not fix the issue, it is possible that your HDD or SSD is damaged and needs to be replaced.
2. Obtain a new compatible HDD or SSD for your Acer Nitro 5 laptop.
3. Turn off your laptop and follow the steps mentioned in Step 2 to access the compartment cover.
4. Disconnect the damaged HDD or SSD by removing the connector cable.
5. Carefully remove the faulty drive from its slot.
6. Insert the new HDD or SSD into the slot and connect it securely using the connector cable.
7. Reattach the compartment cover, ensuring it is properly aligned, and tighten the screws.
Experiencing a "No Bootable Device" error on your Acer Nitro 5 laptop usually can be resolved by following the steps outlined above. Starting with setting BIOS defaults, then proceeding to clean the HDD or SSD connector, and finally replacing the faulty drive if necessary, these troubleshooting steps aim to provide a comprehensive solution. By following these steps carefully, you should be able to fix the "No Bootable Device" error and have your Acer Nitro 5 laptop up and running again.
